WiFi Antenna SMA Male for Cellular Modem and DTU
- Connectors and length customization
- Frequency band customization
- Regarding size customization
- Minor customization
- Drawing-based customization
- Sample-based customization
- Full customization
Share to:
Product Overview
Short WiFi Antenna for DTU Gateway and Wireless Module
Product features:
This compact wifi antenna suits installations where space is limited. Its short body fits inside cabinets, terminal housings and camera enclosures, while the right-angle connector keeps it clear of doors and nearby components. The trade-off is lower gain than a longer whip, so we state its actual rating rather than rely on inflated figures. The 2.4G antenna element is slightly longer than a quarter wavelength and tuned with the housing and host ground plane. A built-in trap in the moulded section supports the upper band and helps maintain a useful radiation pattern. The flexible Rubber whip antenna has a protective overmoulded body, and its angled base helps reduce knocks to the connector. Before ordering, check the connector gender and polarity. Standard SMA and RP-SMA connectors may share the same threads, but their centre contacts differ, so they are not interchangeable. With a short wifi antenna, port compatibility and installation clearance matter just as much as gain.
Parameter
| Type | wifi antenna | Antenna Gain | 2dbi |
| Connector Type | Male | Model Number | FS-JB007 |
| Return Loss | 1.5 | Brand Name | FS |
| Place of Origin | Guangdong,China | Installation | Screw |
| Ingress Protection | IP67 | Polarization | Vertical polarization |
| Maximum input power | 50w | Antenna Frequency | 2.4G |
| Single gross weight | 0.015 kg | Single package size | 12X12X2 cm |
Application
- Industrial IoT and Remote Monitoring-Cellular modems, DTUs, RTUs and telemetry gateways are often installed inside control cabinets, where space around the antenna port is limited. This short 2.4G antenna connects to a compatible SMA female port without taking up much room. Its right-angle design helps keep the element clear of cabinet doors, wiring and nearby components, making it a good fit for industrial routers and remote monitoring equipment.
- Vending Machines, Ticketing and POS Terminals-Vending machines, ticket dispensers and payment terminals operate in busy environments where antennas can get knocked or caught on nearby objects. A short WiFi antenna keeps the installation close to the equipment housing and reduces the leverage that a longer whip can put on the connector. The right-angle body also fits neatly into confined spaces around card readers and embedded wireless modules.
- Industrial and Building Automation-DIN-rail gateways, building controllers and wall-mounted panels leave little room for antennas that extend straight out from the enclosure. A longer whip can obstruct the door or get damaged during routine maintenance. This rubber whip antenna offers a lower-profile option for compatible 2.4 GHz devices, including automation gateways and network controllers.
- Security Cameras and Access Control-Wireless cameras, door controllers and access systems may need an external antenna without adding much bulk to the housing. This short WiFi antenna suits installations with a protected antenna port or a sealed cable entry. For outdoor use, pay attention to the entire connection, not just the antenna body. The mating port, gasket and cable entry also need suitable protection against water.
FAQ
Q1. Will this WiFi antenna fit my router or modem?
It depends on the antenna port. This version has an SMA male connector with a centre pin, which fits an SMA female port. Some consumer routers use RP-SMA ports instead, so check the connector before ordering. If you’re not sure, send us the device model or a close-up photo of the port. We can help identify the correct version or suggest an adapter.
Q2. Does this antenna support both 2.4 GHz and 5.8 GHz WiFi?
Yes. It covers 2400–2500 MHz and 5150–5850 MHz, making it suitable for compatible dual-band WiFi devices. If you only use 2.4 GHz, the lower band is still supported. For applications that require precise frequency coverage, we can provide test curves for both bands.
Q3. Why is the gain 2 dBi when other antennas advertise 5 dBi?
The 2 dBi rating reflects this antenna’s actual design rather than a peak figure selected for marketing. Gain depends on the radiator, matching circuit and ground plane, so figures from different antennas are not always directly comparable. If you need greater coverage, a longer antenna may be worth considering, provided your installation has enough room.
Q4. Can I use this short WiFi antenna outdoors?
The moulded antenna body has an IP67 rating, and the metal parts have passed salt-spray testing. However, the SMA connection still needs proper sealing. Water can enter through the mating joint if the device port has no suitable gasket or weatherproof protection. For exposed outdoor installations, make sure the complete connection is sealed, not just the antenna body.
Related Products
Send Us Your RF Project Requirements
Sales: nora@fs-sz.com
Technical Support:jason@fs-sz.com
Sales :+86-13316864973
Technical Support :
+86-13683276589
+86-13427976189
+86-0755-85223189













